31.07.2020

Monoprice Tablet Can't Install Software Mac

Monoprice Tablet Can't Install Software Mac 4,7/5 8911 votes

Common Issues:

Step 2 — Install Mac Tablet drivers Open Mac OS X Driver and Software Installer, then open Mac OS X, and then double click on TouchTablet Installer-Monoprice 1.0.pkg to run the driver installer. Complete the installer, and the TouchTablet Application should open. Plug in your tablet USB cable to adjust settings. The TouchTablet Application can. Monoprice needs to catch up, but basic software is by no means a dealbreaker. Once the tablet was all set up, I found it to be quite pleasant to use. Monoprice’s gen 2 tablet (the one before this) used a capacitive digitizer similar to the N-Trig tech in the Microsoft Surface’s 3 and 4.

Dual Screen Issue (mouse cursor only stays on one screen)

  1. Graphics programs can seize the mouse cursor and prevent it from moving across multiple screens.
  2. Make sure all windows updates are installed.


The tablet programs/pen will not run correctly in Windows Vista/ 7

  1. Try running the program in Administrator Mode by right-clicking the application and selecting “Run As…” And Run as the administrator.
  2. Sometimes after an update the programs will cease to function correctly. One fix is to try setting the pc back to an older restore point
  3. Another option is to try running the program in compatibility mode. Open the Program Compatibility Wizard by clicking the Start button, clicking Control Panel, clicking Programs, and then clicking Use an older program with this version of Windows. Then the compatibility wizard will come up, follow the instruction on the compatibility wizard.


LED doesn't stay on, pen doesn't work.

Please verify that the green LED flashes once when you plug in the USB cable into your computer. If it does not flash, you may want to try a different USB port. Otherwise, the LED stays off except when you tap the pen against the tablet. If it does not flash when the pen is tapped against the tablet, there are a few things you may want to try:

  1. Replace the battery. Verify that your positive connection is up, and the battery lead is making good contact with the battery. Tap the pen against the tablet and see if the LED flashes.
  2. Sometimes the battery lead does not make a good connection. Please double-check that the battery lead is in full contact with the battery, and that if necessary, bend the lead down to make better contact with the battery terminal. Tap the pen against the tablet and see if the LED flashes.
  3. If the pen is still not responding, please try changing the pen tip with one of the spares that was provided. Tap the pen against the tablet and see if the LED flashes.


Mouse cursor moves to top left anytime the pen is tapped.

  1. This indicates that the incorrect drivers are being used for the tablet device. While the tablet is connected, please go to the device manager, find your tablet device, and remove the drivers for that device. Disconnect the tablet and reboot. Once your computer is booted up again, install the drivers and programs from the provided CD. Reboot after the installation finishes. Once the computer is back online, you may plug the tablet back in.


Pen does not work, doesn't control mouse cursor.

There is no switch on this item to turn it on and off. Basically, as long as it is plugged in, it is turned on. Please verify that the green LED flashes once when you plug in the USB cable into your computer. If it does not flash, you may want to try a different USB port. Otherwise, the LED stays off except when you tap the pen against the tablet. If it does not flash when the pen is tapped against the tablet, there are a few things you may want to try:

  1. Replace the battery. Verify that your positive connection is up, and the battery lead is making good contact with the battery. Tap the pen against the tablet and see if the LED flashes.
  2. Sometimes the battery lead does not make a good connection. Please double-check that the battery lead is in full contact with the battery, and that if necessary, bend the lead down to make better contact with the battery terminal. Tap the pen against the tablet and see if the LED flashes.
  3. If the pen is still not responding, please try changing the pen tip with one of the spares that was provided. Tap the pen against the tablet and see if the LED flashes.



Mac app store download free

Problem: too sensitive in some cases, shorts cuts don't always work

  1. You may configure the pen tablet by modifying the functions of pen tip and the two barrel buttons, tap [Start] > [Settings] > [Control Panel], and double-tap the [Tablet Setting ] icon, or tap on the tablet icon in the system tray, usually located at the lower right corner of the screen. You may also adjust the pressure sensitivity of the digital pen by determining the scope of the tablet’s working area, or (re-) program the hot-cells of your pen tablet by modifying the device driver.
  2. Pressure Tab - There are four different colors for selecting the pressure sensitivity of the pen which can be adjusted in this tab. There is a test area to see the thickness of a line by applying pressure to pen tip on the tablet. The numerical value of the pressure level is shown in the field above the Clear Button.
  3. There is also a Click Sensitivity setting - By default settings, tapping with the pen tip is equivalent to a left click of a mouse. Move the slider in the sensitivity bar to adjust the response of the pen tip. Light means the pen tip will be react very quickly, but the heavy function is opposite.


After installing the Driver, Tablet Software is not working.

Monoprice Tablet Software Download

1) If the cursor cannot move and follow the digital pen on the working area of tablet and no tablet icon displays on the lower right corner of system tray, that outcome means the driver of installation failed. Please check the following steps:

  1. Please unplug the tablet's USB plug from the computer.
  2. Remove the Tablet driver from the system.
  3. Re-connect the Tablet's USB to the computer:
  • Check whether the tablet's LED is blinking or not after the USB is connected. If it does not try connecting it to another USB 2.0 port. You could also try using a different USB cable.
  • Test your pen on tablet working area. The LED should light up as you touch it and you should be able to move the cursor as a mouse, which means the hardware is OK. If it doesn't work, please change the battery with a new one, or check the pen tip to make sure that it is securely in place.

2) You can download the latest version of the driver for free directly from our website.

3) Setup the new version of driver; it will require you to restart your computer.

Monoprice Tablet Drivers Windows 10

4) After restart your computer, on bottom right of the screen, you can find the tablet icon within there.

  • If you can't find the tablet icon on the bottom right of the screen, it means the driver fail in startup, It might cause by an incompatible issue.
  • Check Device Manager for an exclamation mark occurs, if there is one double check to make sure you are using the correct drivers.
Monoprice Tablet Can

5) If you continue to have issues with the tablet functioning on a windows pc try installing the drivers in safe mode. Restart the computer and press the F8 key as the computer starts to boot. Select Safe Mode and retry the installation again for the drivers.

Introduction

Monoprice Tablet Can't Install Software Mac 10

Follow this guide to install drivers for the recommended Monoprice drawing tablet.

  • Use the drivers from the CD that came with your tablet, or download them from the Art & Design file server while in the department, or see your instructor or IT support tech.
  • Monoprice has different drivers for different models, so be sure you have the correct drivers for your tablet. These instructions are for the supported/recommended 8' x 6' Monoprice tablet.
  • Install the drivers before connecting the tablet to your Mac.
Mac
    • If you don't have the original files, They are also located here: FileStorage/• Software & Tools/Monoprice 8 x 6 Tablet Mac Drivers

    • Log into any A&D lab computer to get access to FileStorage.

    • Copy the entire Monoprice 8 x 6 Tablet Mac Tools folder to your computer (flash drive, cloud storage, etc.)

    • Open Mac OS X Driver and Software Installer, then open Mac OS X, and then double click on TouchTablet Installer-Monoprice 1.0.pkg to run the driver installer.

    • Complete the installer, and the TouchTablet Application should open. Plug in your tablet USB cable to adjust settings.

    • The TouchTablet Application can be found in the Applications folder.

Monoprice Drawing Tablet Software Download

If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy.

If you have questions, or can't easily use a lab machine to grab the drivers from the departmental server, please see Matt the IT guy.

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview